This mail describes the complete process of changing the fat and fat filter at a BMW 3-series made among 1992 and 1999. if you conduct a destiny of traveling, this will preserve you money each attach of months and add convenience, though you can convert the fat when you please.
.
1) motivate your lorry until it reaches running temperature ought aid at the river of the oil, which is less viscous when warm.
2) Park your lorry at a even surface and vacant the hood. place at gloves if desired.
3) discover a hard put ought use the constrain of the jack ought originate the car. Some models consume a circular jack pad hind too of the front two tires attached ought the chassis. Otherwise, discover a hard member of the chassis ought use the jack. at an
M3, there is a cross member running from left ought precise hind the front wheels that is a good put ought use the lie conduct no jack up your lorry by applying the jack ought a segregate of the suspension.
4) Jack the lorry up high enough ought slip the jack stands beneath. use the lie ought a hard segregate of the chassis, then slowly free the jack allowing the lorry ought cease at the stand. quote though the other side.
5) amuse below your lorry and locate the fat plug at the bottom phase of the engine. It will most likely exist a 17 mm nut (on convertibles, it will exist below the middle division of
X mode cross member, at the passenger side). put the fat pan below the plug. use a socket wrench ought touch the plug and washer. It can aid ought use interior strain at the plug when removing it ought make away spilling hot oil.
6) lease nearly 20+ minutes though the fat ought drain completely. Some nation touch the jack stands and lower the lorry ought insure complete of the fat drains though the lorry is leveled.
7) vacant the new fat filter. sweep the fat plug and put the new washer that came with the filter at it. Getting undergo below the car, replace the plug. conduct no at tighten. It ought exist torqued ought nearly 18 feet (5.5Â m)-lb. touch the fat pan and lower the car, removing the jack stands.
8) touch the cover of the fat filter housing. at these cars the filter is below the hood, making it simple ought change. frequently it requires a 13-mm socket wrench, besides double check ought pattern certain this is the precise size (some can need a size up ought 36-mm). though with any nut, you wish ought make away stripping it.
9) Using gloves and a towel, touch the filter from the canister. replace with your new filter. use new, sweep fat ought the new o-ring ago replacing that though well. Torque ought nearly 16 feet (4.9Â m)-lb.
10) Using the funnel, fill the mechanism with new fat across the filler cap at climax of the engine. check with your merchant ought weep on how much fat your lorry requires depending at the size of the engine. replace the cap, touch any tools, and begin the car. hind a little minutes check under ought insure that there are no leaks and grow the lorry off. check the fat flat at the dipstick. It ought exist among the two notches. if it is too low, add a moment amount, river the lorry again, and complete it off ought check the fat flat until it is right.
11) sweep up and dispose of fat at an fat depository, such though an AUTO PARTS store, a garage, or a public depository. conduct no dump the oil.
0
